We independently research,review,test and recommend the best products.If you buy something through our links, we may earn a commission.

How To Use Vax Carpet Cleaner? : Posttreatment & Pretreatment

Vax Carpet Cleaner has become a household name since its launch in 2010. The company sells a wide range of cleaning solutions for carpets, rugs, upholstery, curtains, mattresses, and other surfaces. 

This all-in-one carpet cleaner has a powerful suction system that can clean every inch of your rug. It comes with a built-in deep cleaning process that removes any dirt and debris and keeps your carpet looking new. This is a very pet-friendly cleaner as well. 

However, you must know how to use a vax carpet cleaner properly. It will ensure effective cleaning and minimize the effort as well.

How to use Vax carpet cleaner?

Vax carpet cleaner is the most popular type of carpet cleaner. It uses suction to pick up dirt and dust particles. However, it is usually more expensive than handheld devices. They may be easier to operate, but they require regular maintenance.

How To Use Vax Carpet Cleaner process

They are designed to pick up loose debris such as pet hair, dust, and pollen. The handheld parts of the cleaner include different sizes and shapes. Most might find it confusing to control the cleaner.

First off, set the cleaner properly:

  • If you’ve used the cleaner before, then start by cleaning it. You need to remove the tank. Press the release latch and pull it off.
  • Now drain all the dirty water.
  • Don’t forget to clean the right filter screen as well.
  • Now, you can re-adjust the machine as it was.  

Make sure you’re gathering all essential elements before jumping on to cleaning.

Things you’ll need:

• Dust mask

• Gloves

• A bucket or trash bag


1. Arrange enough room around furniture and walls to maneuver your machine safely.

2. Spray the cleaner onto the area you wish to clean. Give it ten minutes to set correctly.

3. Now, start vacuuming the dirty area thoroughly. Be careful not to scratch the floor.

4. Repeat the first and third steps until the entire area is clean.

5. Rinse the area with water and wipe dry.

6. If necessary, repeat the first and fifth steps here.

6. Blot paper towels and remove all the access moisture thoroughly.

7. Use a broom to sweep the area if needed.

8. Remove any residue left by the cleaner with a damp cloth.

Now you’re done. Give a final check over the area and repeat the process where dirt exists.


  1. Store the cleaner in its original container.

       2. Keep the cleaner away from children and pets.

       3. Do not store the product near heat sources such as radiators.

      4. Do not store the product under direct sunlight.

       5. Always read the label before each use.

       6. Dispose of the empty container properly.

       7. Clean the vax cleaner parts: Nozzles, spin scrub, brushbar after every use.


Pre-treating your carpet or rug is an essential step for getting the best results from your vax carpet cleaner.


The best way to pre-treat your carpet is to apply a small amount of carpet cleaner directly onto the fibers. Give the solution to sit for 10 minutes. Lastly, you can now vacuum up all excess liquid.

It’s recommended that you add one teaspoon of detergent per gallon of water to the cleaning solution. It is also possible to use baking soda as a substitute for detergent.

It’s also possible to use vinegar as a pretreatment. Grab 2 tbsp white distilled vinegar and mix it into one gallon of water. Apply the mixture evenly over the entire floor area using a spray bottle. Ensure vacuuming the space before five minutes when you start cleaning. 

Use caution when applying any pretreatment. Avoid breathing vapors and avoid touching your eyes or skin while working around the vapor.

Step by Step Instructions:

1. Make sure there is no moisture in the room.

2. Spray the surface of the carpet with a misting nozzle.

3. Vacuum up all excess liquid. Do not leave any residue behind.

4. Grab a wet/dry vacuum to remove the remaining liquid.

5. Clean the nozzle of the machine.

6. Fill the reservoir with enough water to cover the bottom plate.

7. Turn the steam cleaner on.

8. Set the desired temperature.

9. Press the start button.

10. Wait until the display shows “ON.”

11. Start moving the wand across the floor.

12. When finished, press stop.

13. Remove the wand from the floor.

14. Press the power switch to turn the steamer off.

15. Unplug the machine.

16. Empty the water container.

17. Place the empty container back into its storage place.

18. Repeat steps 3 through 17 if necessary.

19. Store the machine away from children and pets.

20. Follow manufacturer instructions for maintenance.

21. Enjoy!

22. Cleaner Tips. 


After treating your carpet, you need to give it some time to get the air out. The process will take at least 24 hours. Evaporate the chemicals thoroughly.

If you live in an apartment building, ask your landlord if they would be willing to open windows during the day.

If you plan to wash your carpet yourself, make sure you have plenty of ventilation. Keep the doors and windows open.

If you have any pets, keep them indoors and away from the space during the post-treatment period. The fumes may cause respiratory problems.

Step by Step instructions:

1. Turn on the machine.

2. Select the appropriate setting for your carpet type.

3. Move the wand slowly over the carpet.

4. Now, move the wand backward.

5. Keep continuing the cleaning process until you find it thoroughly cleaned.

6. Stop moving the wand.

7. Press the power switch.

8. Wait until the display says “OFF.”

9. Unplug the machine and store it safely.

10. Let the carpet air out for at least 48 hours.

11. Vacuum the carpet again.

12. Wipe down the walls and furniture.

13. Wash the baseboards.

14. Vacuum the floor.

15. Replace the filter.

16. If needed, repeat steps 1-15.

17. Enjoy!

Frequently Asked Questions 

Question: How often should one clean your carpet?

Answer: The time-space depends on what type of carpet you have. If it’s a natural fiber like wool or silk, you can expect to wash it every few months or so. Synthetic fibers need more frequent cleaning, such as once a month.

Question: How much is a good carpet cleaner?

Answer: A good carpet cleaner will cost between $100 and $200. You’ll want one that uses a HEPA filter, which traps dust particles. It will also remove stains thoroughly.

Final Words

Vax Carpet Cleaner has been available in the market since 2016, but it was only recently that they started marketing themselves as an environmentally friendly alternative to traditional carpet cleaners. The first thing that needs to mark, is that it is pretty expensive.

It costs $1,499.00 on Amazon.com.The the last thing to remember is how to use the vax carpet cleaner. Make sure you’re following the proper process for better and more effective cleansing.

1 thought on “How To Use Vax Carpet Cleaner? : Posttreatment & Pretreatment”

Leave a Comment